Cooper Menvier 100 Betriebsanweisung Seite 37

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 38
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 36
Menvier40/100 Technical Specification
Page 33
Other
If you wish to connect the control unit to a
PC using either the Ethernet or the USB
port then make sure that the cables have
the following specifications:
Ethernet
Cat5e patch cable, RJ45
male plugs at each end,
suitable for 10/100Base-T.
USB
Mini-B plug for control unit
end, USB-A for PC end.
Max length 3m.
Radio Expander and Keypads
Radio
Operating frequency
868.6625MHz Narrowband.
EN 300 220-3.
EN 300 330-2
Transmitter
range
The range of the
transmitters compatible
with this control unit
depends on the
environment in which they
are installed. As a
guideline, most
transmitters will work up
200m range in free space
conditions.
Compliance Statements
The Menvier40 and Menvier100 are
compliant with EN50130-5 environmental
class II.
The Menvier40 and Menvier100 are suitable
for use in systems designed to comply with
PD 6662: 2010 at grade 3.
When installed correctly the Menvier40 and
Menvier100 are capable of compliance with
EN50131 at Grade 3.
To maintain Grade 3 the Menvier40 and
Menvier100 must be fitted with a
communicator of level ATS4 or above.
When fitted with radio devices the
Menvier40 and Menvier100 are capable of
compliance with EN50131 at Grade 2.
The i-sd02 is compliant with EN50136-1 as
an ATS2 communicator.
The i-sd02 may be used as a
supplementary communicator at Grade 3.
At Grade 2 the i-sd02 provides a compliant
communicator for the Menvier40 and
Menvier100 provided that:
a) It is installed in accordance with the
installation instructions.
b) The connected PSTN is functioning
normally.
When fitted with an i-sd02 the control unit
provides options A, B and C at Grade 2 as
noted in Table 10 of EN50131-
1:2006+A1:2009.
If the installer selects a non-compliant
configuration then they must remove or
adjust compliance labelling
Third party testing carried out by Anpi.
Compatible Equipment
705rEUR-00 Two button HUA (top
button is disabled)
703rEUR-00 4-channel (2 zone)
transmitter
706rEUR-00 Two button HUD/tilt
switch transmitter
710rEUR-00 Two button HUD
713rEUR-00 Pet tolerant PIR
714rEUR-00 PIR Transmitter (Small
case)
720rEUR-00 Smoke Detector
Transmitter
726rEUR-50 Long range hand held HUD
726rEUR-60 Short range hand held HUD
727rEUR-00 Four button remote
control with encrypted
code (HUD function not
compatible with BS8243)
734rEUR-00/01 CC/FSL Door Contact
Transmitter (white)
734rEUR-05/06 CC/FSL Door Contact
Transmitter (brown)
738rEUR-00/04 Spyder shock sensor
(white/brown)
739rEUR-50 Sentrol glass break
detector (no tamper)
760ES External Wireless
sounder
762rEUR-00 Two Channel Receiver
768rEUR-50 Eight Channel Receiver
770rEUR-00 Wireless Accessory
Module (repeater mode
only)
08844EUR-00 GPRS module (obsolete)
Seitenansicht 36
1 2 ... 32 33 34 35 36 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare