Cooper Menvier 100 Technical Information Seite 14
- Seite / 48
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
14
Installation
Wiring Hints
• Each terminal is suitable for clamping up to 2 wires.
• Clamping of 2 wires of very different diameters
under one screw is not commended.
• Suitable for mounting to mounting boxes with
50-80mm fixing centres.
General
If difficulty is experienced when mounting the
detector, this may be due to the following:
• Wiring causing an obstruction - move or shorten
wires.
• Although the base is tolerant to uneven mounting
surfaces, a very uneven surface may cause the
base to deform when the mounting screws are
tightened down - loosen screws to reduce this
or slide base to a more flat position.
Utilising Locking Tab
Mounting base includes an optional feature to prevent
the removal of the detector without the use of a tool.
1. Remove the standard fit retaining clip.
2. Insert the locking clip which is located at the centre
of the base as shown.
Mount the detector onto the base and rotate fully
clockwise until it finally clicks.
The detector is now locked into position. Remove by
utilising a suitable tool (eg a thin screwdriver) into the
hole in the detector cover. Gently push the tool into
the detector and rotate anticlockwise.
Warning!
Do not use high voltage testers when detectors
or control panel are connected to the system.
Dimensions
D
Dia
1
2
Description Dia (mm) D (mm)
Sensor Base 104 22
Code Description
UCAB300 Common Base
Product Codes
UCAB300 - Analogue Sensor Base
- UL Listed Range 1
- Fire Systems 1
- ONE COOPER 2
- Contents 3
- About us 4
- Dimensions (Metal) 6
- Dimensions (Plastic) 6
- Standard Connections 8
- Technical Specification 10
- Dimensions 10
- Product Codes 10
- Mounting the Backbox 10
- Addressable Sensors 11
- UL Product Range 13
- Warning! 14
- Installation 14
- Conventional Detectors 15
- Addressable Pull Stations 19
- HNR & HNWC Horns 21
- HNR & HNWC - Horns 22
- HSR & HSWC Horn Strobes 23
- HSR & HSWC - Horn Strobes 24
- Horn Strobe Ratings 26
- Dimensions - Wall 26
- Dimensions - Ceiling 26
- Candela Ratings 28
- ULCZMU352 Zone Monitor Unit 31
- ULCZMU352 - Zone Monitor Unit 32
- ULCSUM355 Shop Monitor Unit 33
- ULCSUM355 - Shop Monitor Unit 34
- ULCSI350 Spur Isolator Unit 35
- ULCSI350 - Spur Isolator Unit 36
- ULCIO351 3 Channel I/O Unit 37
- ULCI0351 - 3 Channel I/O Unit 38
- ANALOGUE ADDRESSABLE LOOP 40
- CIRCUITS 40
- Maximum 20 42
- Conventional 42
- Detectors 42
- Wiring Class Class A Style 7 44
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Cooper Menvier 100
(8 Seiten)
(110 Seiten)Bauknecht GSIK 5010 SD IN manuály
Uživatelské manuály a uživatelské příručky pro ne Bauknecht GSIK 5010 SD IN.
Poskytujeme 1 manuály pdf Bauknecht GSIK 5010 SD IN ke stažení zdarma podle typů dokumentů: Návod k použití
Kommentare zu diesen Handbüchern