Cooper Menvier 100 Technical Information PDF herunterladen (Seite 34)

Note:

1. The end of line resistor must always be fitted, even

if the inputs are unused.

2. Recommended cable type FPLP (plenum cable),

type FPLR (riser cable), or type FPL.

Description SLC Field Callpoint Detector Sounder 1 24 V External External

Wiring (Input) Zone Zone Sounder 2 Supply PSU Monitor

Wiring 12 12 12 12 12 12

Gauge Max AWG Max AWG Max AWG Max AWG Max AWG Max AWG

Wiring Class A Class B Class B Class B N/A N/A

Class Style 7 Style C Style C Style Y

Ground 0.1 ohm 0.1 ohm 0.1 ohm 0.1 ohm TBD TBD

Fault Power Power

Impedance Supply Supply

Supervised, Yes Yes Yes Regulated Supervised Supplementary

Power Supervised Power

Limited Power Limited

Limited

Compatibility ULCV1 Compatible Detectors: UPCD-2W, UCPT-2W, UCHRI, UCHT, UCHTI

Identifier

Installation

1. Separate the two halves of the unit.

2. Drill out (or knock out) the required cable entries

in the surface mounting back-box.

3. Fit the back-box in position and pass the wires

into it.

4. Connect the unit according to the diagram below.

Note:

No addressing of the interface is required.

(See control panel operation for details).

Standard Connections

Technical Specification

Operation

Callpoint Zone:

Normal Standby, Alarm, NAC Silenced, Alarm Reset,

Trouble, Supervisory, Drill.

Detector Zone:

Normal Standby, Alarm, Trouble.

Code ULCSUM355

Description Shop Mointor Unit

Standards UL864 9

edition

Signalling Line Circuit

Style 7, Class A, Supervised, Power Limited

Voltage 24 V dc

Current 4.9 mA to 5.0 mA

Line Impedance 50 Ω (max)

Detector Zone

Style C, Class B, Supervised, Power Limited

Voltage 21 V dc to 26 V dc, 22.9 V dc (nom)

Current (Alarm) 17 mA to 40 mA

Line Impedance 2.5 Ω (max)

End of Line Resistor 5.6 kΩ

Fire Input Trigger 680 Ω

UPCD-2W, UCPT-2W, UCHRI, UCHT

any combination thereof

Compatibility Identifier ULCV1

Sounder 1, Sounder 2

Style Y, Class B, Supervised, Power Limited

Voltage 24 V dc

Current 1 A (max)

Line Impedance 8 Ω

End of Line Resistance 12 kΩ

Callpoint Zone

Style C, Class B, Supervised, Power Limited

Voltage

(8.4 Vpp pulsed every 1 second) 8.4 V

Current 1.2 mA

Line Impedance 16 Ω

End of Line Resistor 6.8 kΩ

Trigger Resistor 680 Ω

24 V external PSU

Supervised, Power Limited

Voltage 24 V dc

Current 2 A (max)

End of Line Resistor 12 kΩ

Line Impendance 4 Ω

Gauge Wire 12 AWG

UL 1481 listed regulated for fire, current limited

Environmental

Operating Temperature 0°C to 49°C

Humidity (Non Condensing) 0 to 93 %RH

Physical

Dimensions (H x W x D) 180mm x 129mm x 60mm

Weight 0.28kg

Ingress Protection IP65

Compatibility

Suitable for use with Menvier analogue addressable fire systems

Code Description

ULCSUM355 Shop Monitor Unit

Product Codes

LOOP

OUT

SOUNDER

EXTERNAL

PSU

MONITOR

24V

EXTERNAL

PSU

INPUT

Fault

Contact

N/O

UL1481 LISTED FOR FIRE

24V DC OUTPUT

POWER SUPPL Y UNIT

24V

O/P

12K

Addressable Loop

CALL

POINT

ZONE

DETECT OR

ZONE

- OUT +

- IN +

- OUT +

- IN +

6K8

5K6

Maximum 20

Conventional

Detectors

FIRE

RELAY

ULCSUM355 - Shop Monitor Unit

Dimensions

H (mm) W (mm) D (mm)

180 129 60

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Cooper Menvier 100 Technical Information Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Cooper Menvier 100