Cooper Menvier 100 Technical Information PDF herunterladen (Seite 15)

UL Product Range

Conventional Detectors

Overview

Photoelectric smoke detector (opto) is suitable for

most applications giving the fastest response to slow

burning or smouldering fires which give rise to large

visible smoke particles.

Opto-heat detector will respond better to fast clean

burning fires yet maintain the advantage of optical

detectors when detecting smouldering fires. The

thermal enhancement of this detector allows a higher

alarm threshold which provides a greater rejection of

false alarms. The detector will also raise an alarm

at temperatures above 135°F.

Rate of Rise detector and Fixed Heat detector will

detect a rapid increase in temperature or

temperatures above 135°F or 194°F (dependent on

switch selection) and should be used in environments

where the ambient conditions might cause false

alarms if smoke detection were to be used, for

example where there is a high level of dust, fumes,

steam or smoke under normal conditions.

Features

• Stylish low profile design

• 360º viewable LED design

• Removable detector chamber

• Drift compensation

Benefits

• Plug and play no hard

addressing required

• ‘Clean me’ feature means

sensor can be cleaned on

site using the Menvier manual

leaning procedure

Conventional Detector, Opto-Heat (UCPT-2W)

Conventional Detector, Optical (UCPD-2W)

Conventional Detector, Multi-Mode Heat

(UCHT-2W, UCHTI-2W, UCHR-2W, UCHRI-2W)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Keine Kommentare

Cooper Menvier 100 Technical Information Seite 15