
2-14 SPARC Enterprise Mx000 Servers XSCF User’s Guide • December 2010
10. Establish a connection to XSCF and log in from a web browser.
■ Specify the host name or the IP address of the XSCF during the network configuration, in
a web browser running on a PC with an XSCF-LAN port used to establish a connection to
the XSCF.
(This screen image is an example and differs from the actual screen display.)
Note – The web browser window for the XSCF Web is called the XSCF Web console.
■ Log in.
(This screen image is an example and differs from the actual screen display.)
Note – When connecting using https, a warning message appears in the web browser until
the certificate is installed.
11. Open the XSCF Administration window.
(This screen image is an example and differs from the actual screen display.)
■ The remaining setting items are the same as those applicable to setup using the XSCF
Web. Referring to the setup flow, proceed to Step 9 and later steps in Section 2.1.1, “Setup
Summary by the XSCF Shell” on page 2-2. For details on the commands used to make
settings, see the corresponding parts of Section 2.2, “Specifying the XSCF Settings” on
page 2-15.
<Web browser screen image>
URL https://192.168.111.111/ (The IP address of XSCF is input by number)
Alternatively:
https://XSCF-host-name/ (Not the host name of a domain)
<Web browser screen image>
login:yyyy
Password:xxxxxxxx
<Web browser screen image>
XSCF Web console
- Remote Maintenance Service Administration
- Firmware Update
Kommentare zu diesen Handbüchern